circulating fluidized bed boiler flue gas recirculation

Technology Overview: Circulating Fluidized-Bed Combustion

As gas velocities are increased the bed surface becomes more and more dispersed and solids entrainment increases to the point that solids recirculation (usually with a cyclone) is required to maintain bed inventory. This state has been referred to as a "circulating" or "fast" fluidization.

learn More

Application of Circulating Fluidized Bed Boiler--ZBG

Fine particles of partly burned coal ash and bed material are carried along with the flue gases to the upper areas of the furnace and then into a cyclone. In the cyclone the heavier particles separate from the gas and falls to the hopper of the cyclone. This returns to the furnace for recirculation. so the name Circulating Fluidized Bed combustion.

learn More

Oxy-fuel combustion in circulating fluidized bed boilers ...

The conditions for CO2 reduction in a circulating fluidized bed (CFB) oxy-boiler are studied that is operation with pure oxygen diluted by recirculated flue gases to moderate the combustion ...

learn More

Effects of flue gas recirculation on energy exergy ...

Nov 17 2020 · In this study energy exergy environment and economic (4E) analyses were performed for a 500MW e oxycoal ultrasupercritical circulating fluidizedbed (CFB) power plant with CO 2 capture. The effect of the location of fluegas recirculation (FGR) on the 4E values was investigated for wet FGR (wFGR) at 170°C dry FGR (dFGR) at 68°C and 80% wet and 20% dry FGR (wdFGR).

learn More